Grandstream gxw4104 fxo manual
Log back in and go to the same page. .
Stage Method: ch1-4:1; Note: This entry sets up the GXW-4104 to use 1-stage dialing. .
dtmf Methods: ch1-4:2; Port Scheduling Schema (voip- pstn). .
Channel Specific Setting:. .RX is the audio sent from the phone company to the speaker of my telephone.T.38 Setting: change mode.Make the following changes: FXO Lines, tab (at top of configuration screen FXO Termination:. .RX from pstn Audio ultra uxtheme patcher windows 8 Gain (db ch1-4:6; Note: You may have to adjust the figures above. .Automatic Upgrade: Yes (10080 minutes youll generally want to perform an FXO Impedence test on every line that is connected. .
SIP Server: ch1-4:p1; Sip Destination Port: ch1-4:5060 ; pstn to VIP Caller ID Setting:. .
If you want all calls to be routed the same way on all lines, you could put the same number for each channel and then just create one inbound route (i.e.
You dont need to change.).General Settings Trunk Name: GXW4104-1 Outbound Caller ID: Note: You can put whatever you want here.Set the Round Robin as follows: Round-Robin and/or Flexible: rr:1-4 ;. . Change above to the IP address of your GXW-4104.When finished, uncheck all boxes, update, and reboot.Do this test after you connect all of your phone lines.Youll generally want to assign the GXW-4104 to a static IP address. .Advanced Settings: Admin Password: *whateveryouwant, firmware Upgrade and Provisioning: Upgrade via: Check http, firmware Server Path: . However, you can use FreePBX/Asterisk to conference separate lines together to make a conference calls.