Whirlpool awo 3561/5 manual
You may also download the following manuals related to this product: whirlpool AWO 3561/5 program chart (261 ko).
Detailed instructions for use are in the User's Guide.
Pour a little detergent (about 30 ml) into the detergent compartment.
We hope that this whirlpool AWO 3561/5 user guide will be useful to you.In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description.Transport / handling Never lift the appliance by the worktop when transporting.The washing machine's safety system has been activated (see Fault display chart) The washing machine has an imbalance detection and correction system.Lastmanuals, for instance, does not offer a translation service.
Check whether: the mains plug is inserted into the socket the wall socket is functioning correctly (use a table lamp or similar appliance to test it) The washing machine will not start.
Link to manual will be sent on Your email address after You place order).
Pour about 1 litre of water into the detergent drawer to reactivate the Eco system.Fm Page 25 Thursday, December 30, 2004 10:53 AM troubleshooting guide Depending on the model, your washing machine is equipped with various automatic safety functions.For models with a Water tap closed indicator lamp, the red indicator lamp lights.Before using the machine, it is imperative that the transport bolts are removed Final spin results are poor.To do this, use the thick rounded corner of the coloured insert from the detergent dispenser or a coin: Slot vertical: the door will not lock Slot horizontal - normal position: the door can be locked again before THE first wash cycle To remove any.The appliance stops during the programme (varies depending on model) Check whether: the Rinse Hold indicator lamp is flashing; terminate this option by pressing the button again In models with LCD display: the Rinse Hold option has been preselected and the Rinse Hold symbol appears.Pull off the mesh filter from the washing machine connection with universal pliers and clean.These faults are frequently so minor that they can be removed within a few minutes.In models with LCD display, in the event of an imbalance, the display shows: If the laundry is still too wet at the end of the cycle, add smaller articles pdf file into autocad of laundry and repeat the spin cycle Excessive foam formation may prevent spinning.24 Black process.Check whether: the door is properly closed (child safety the Start/Pause button has been pressed.